Controlled Products Systems Group 26SASM - Manual (Page 10)

Example: Validate card number 100.
Place the “1” card on the TOUCH CARD
® reader plate, remove it and place
the “0” card on the TOUCH CARD ® reader plate, remove it and place again
the “0” card on the TOUCH CARD ® reader plate, remove it and place the
“VALID” card on the TOUCH CARD ® reader plate, and remove it.
1 + 0 + 0 + VALID
VALIDATING A BLOCK OF CARDS. To validate a block (continuous
sequence) of cards, place the sequence of cards representing the first
card number of the block on the TOUCH CARD
® reader plate, then the
“*” (THRU) card, then the sequence of cards representing the last card
number of the block, and then place the “VALID” card on the TOUCH
CARD
® reader plate.
Example: Validate cards 5 thru 225.
NOTE: After a block Validate or Void is complete, the LED will turn
Green. Then the reader will beep and the LED will turn off.
Place the “5” card on the TOUCH CARD ® reader plate, remove it and place
the “ * ” (THRU) card on the TOUCH CARD ® reader plate, remove it and
place the “2” card on the TOUCH CARD ® reader plate, remove it and again
place the “2” card on the TOUCH CARD ® reader plate, remove it and place
the “5” card on the TOUCH CARD ® reader plate, remove it and place the
“VALID” card on the TOUCH CARD ® reader plate, and remove it.
5 +
*
+ 2 + 2 + 5 + VALID
Secura Key • 6