Controlled Products Systems Group 26SASM - Manual (Page 14)

Secura Key • 10
RELAY CONFIGURATION. The solid-state relay can be set to be
Normally Closed, Normally Open or to operate with the SecuRelay
TM
for increased vandal resistance.
Selections are:
6. Normally Open (Factory default)
7. Normally Closed
8. SecuRelay™ Option.
The default mode is Normally Open (NO). To place the relay in the
Normally Open (NO) mode, place the “
* ” card on the reader twice,
followed by the “6” card.
* + * + 6
To place the relay in the Normally Closed (NC) mode, place the “ * ”card
on the reader twice, followed by the “7” card.
* + * + 7
To place the unit in the SecuRelay TM mode, place the “ * ” card on the
reader twice, followed by the “8” card.
* + * + 8
To return to normal mode, place the “ * ” card on the reader twice
followed by the “1” card.
* + * + 1