Lectrosonics VRFIELD (Narrowband) - Manual (Page 19)

Digital Hybrid Wireless™ Modular Receiver System
Setting Up the VR Field System Via USB Port
Once the LecNet2 ™ software and USB drivers have
been installed (see Installing LecNet2 ™ Software and
USB Driver), setting up the VR Field System using a
Windows ® 2000 or XP computer system is possible.
The following procedure is designed to assist new users
to access the VRpanel and provide a basic understand
of the layout. More detailed explanations concerning
usage and configuration using VRpanel are contained
in the online Help.
Help also documents the VR General Commands
used by external devices, including those produced by
AMX™ and Crestron™, that can be used to operate
and control the VR system.
Opening VRpanel
1. On the computer desktop, click Start then All.Pro­
grams to display the list of programs installed on the
computer. Point to LecNet2 and select VRpanel.for.
VR.Field.Receiver from the LecNet2 submenu to
load the VRpanel.-.How.To.Begin dialog.
2. Select I would like to Add VR detected via USB
and click OK.
3. The Add.VR(s).via.USB dialog lists the ID & Se­
rial Number of all VR Field Systems connected to
the computer via the USB. Click on the VR Field
System to be monitored or configured to display the
VRpanel for that system.
VRpanel Main Window
There are four major elements to the VRpanel Main
Window: Menu Bar, VR Field System Information,
Installed Receiver Modules and Information Bar. The
following information provides a short description of the
VRpanel. For a more detailed explanation of VR Field
System set up and operation via the USB port, refer to
the online Help.
Menu.Bar
Client.Area
Status.Bar
Menu Bar
The Menu Bar list the menus used building and editing
configurations, upgrading firmware and accessing Help.
These include the File menu, Configuration menu and
Help menu.
File.Menu
Configuration.Menu
Help.Menu
File Menu
The File menu contains commands for loading and
saving configurations, upgrading firmware and the EXIT
command.
Configuration Menu
The Configuration menu is used to build a configura­
tion by detecting and adding VR systems. It also allows
configurations to be constructed offline via the Add
Offline command. the addition of VR Field Systems to
the VRpanel.
Rio Rancho, NM 1