Luminex xPONENT 3.1 - Manual (Page 85)

73
Touring the Software
Add header when exporting data from grids. Adds a header row when exporting the
data.
LIS Settings
This setting is only for those using xPONENT
®
with a Lab Information System (LIS).
Connect to LIS. Enables connection to the LIS.
Browse. Opens the Browse For Folder dialog box. Select a location for the system to
watch for incoming orders.
External Analysis Program Settings
This option is for those using a program other than xPONENT to analyze collected data.
Installed Analysis Programs. Lists the analysis programs currently installed.
Add New. Opens the New External Analysis Program dialog box.
FIGURE 46. New External Analysis Program Dialog Box
Browse. Opens another dialog box to select the file location for the third-party analysis
program. The selected location appears in the Path box, and the name displays in the
Name box.
Command Line Parameters. Type the command line parameter for what parameters you
want xPONENT to use with the external analysis program. If the information is supplied
with the external analysis program documentation, use that information. Otherwise, you
can type the following parameters built into xPONENT, in any order:
• #c - Output.csv, full file path
• #p - Protocol name
• #b - Batch name
• #u - Logged in user name
To keep the default command line settings, leave Command Line Parameters blank.