Micromod Micro-DCI: 53SL5100A Single Loop Controller - Manual (Page 28)

Single Loop Process Controller Instruction Manual
20 Front Panel
selectable parameter display. Although the contents of the parameter display are selectable configuration
items, the display format is identical for each of the four control strategies.
Any display type can have a portion of its contents overlaid with an ALARM indicator. If the instrument is
manually set to engineering mode, the display can be overlaid with the CONFIGURATION or DISPLAY
data entry line. Alarm indicators warn of variation changes that exceed tolerance limits; the process may
require immediate attention. The engineering mode (EMODE) overlay provides a single entry line for data
display and alteration.
The three bar graph display types for CS1-4 and the parameter display, with appropriate call outs, are illus-
trated in
Figure 3-2 through Figure 3-5 . Figure 3-6 and Figure 3-7 illustrate displays with alarm and config-
uration overlays.
Figure 3-2. CS1, Single Loop PID Controller or CS2, Analog Backup Controller