Micromod MOD: ICN OPC Server Users Guide - Manual (Page 16)

ICN OPC Server
Application Tutorial
3.2 Instructions
3.2.1 Part 1
1. Launch the ICN OPC Server: From the Windows Start menu, select Programs-ABB
Control Solutions Software Suite - ICN OPC Server.
• The OPC Server will launch as shown in the next figure.
• A blank tag database Untitled is opened by default.
We will add a device to this database. We will save this database later.
Figure 3 .1.
ABB ICN OPC
Server
2. Add a hardware device to the database: Click on the New ICN Device button on the
toolbar or select Add-New ICN Device from the menu bar at the top. This will open the
ICN Device Properties dialog box as shown in the figure below:
• We will configure the properties of the MOD 30ML device we are adding in this
dialog box.
3 - 2