Micromod MOD: ICN OPC Server Users Guide - Manual (Page 34)

ICN OPC Server
Operation and Reference
• Live data values from the instrument will be displayed in the Value column of the
OPC Server application.
• The live data is read-only as this OPC client application and is mainly used for
testing the function of the OPC Server and the communication between the
hardware devices and the OPC Server tag database. It does not allow writing of the
same.
4.1.7 Scaling
Use this menu to define the conversion of raw data into engineering units and define that
as a New Style. You may also delete any styles no longer needed.
To add a new style:
1. Select an existing style to base the new one on if available.
2. In the new style menu enter a unique name and check the initialize from box if it is to
be based on the previously selected style or leave it unchecked to use the default style
scaling data.
3. Enter the following data as appropriate.
Units
Raw Minimum value
Raw Maximum value
Scaled Units Minimum value
Scaled Units Minimum value
Conversion selection
Linear
Square Root
4 - 8