Micromod MOD: ICN OPC Server Users Guide - Manual (Page 19)

ICN OPC Server
Application Tutorial
Figure 3 .5.
Port Properties
• Select the COMM port from the drop-down menu in the Port field and then enable
it by checking the box next to the Enable field.
• Choose the Baud Rate, Parity, Flow Control, Data bits and Stop bits from this
dialog box. Make sure these entries match the settings of the instrument.
• Click on OK to complete the Port configuration.
• Click on OK. The added device will be displayed in the Device Tree on the left
frame as shown in the next figure:
Figure 3 .6.
ABB ICN OPC
Server database
4. Save the database: The OPC tag database can be save as a file with an extension .ICNS
• Select File – Save from the menu bar. Refer to the following figure.
• The Save As dialog box will be displayed next as shown below:
• Choose the same folder where you have saved the instrument database for saving
this file and then type a name for the OPC tag database file in the File name field.
3 - 5