Micromod MOD: ICN OPC Server Users Guide User Manual
Page 31
Advertising
ICN OPC Server
Operation and Reference
• Select the COMM port from the drop-down menu in the Port field and then enable
it by checking the box next to the Enable field.
• Choose the Baud Rate, Parity, Flow Control, Data bits and Stop bits from this
dialog box. Make sure these entries match the settings of the instrument.
• Click on OK to complete the Port configuration.
• The ICN Device Properties dialog box will redisplay with the port number. Leave
other fields on this dialog box at their default values.
• Click on OK. The added device will be displayed in the Device Tree on the left
frame as shown in the next figure:
4 - 5
Advertising