Micromod MOD: ICN OPC Server Users Guide - Manual (Page 2)

ABB Inc.
The Company
ABB Inc. is an established world force in the design and manufacture of instrumentation
for industrial process control, flow measurement, gas and liquid analysis and
environmental applications.
As a part of ABB, a world leader in process automation technology, we offer customers
application expertise, service and support worldwide.
We are committed to teamwork, high quality manufacturing, advanced technology and
unrivaled service and support.
The quality, accuracy and performance of the Company's products result from over 100
years experience, combined with a continuous program of innovative design and
development to incorporate the latest technology.
The NAMAS Calibration Laboratory No. 0255(B) is just one of the ten flow calibration
plants operated by the Company, and is indicative of ABB Inc.'s dedication to quality and
accuracy.
BS EN ISO 9001
St Neots -
Certificate No. Q5907
Stonehouse -
Certificate No. FM 21106
ISO 9001
Rochester, USA -
Certificate No. AQ-8618
EN 29001 (ISO 9001)
Lenno, Italy -
Certificate No. 90/90A
Stonehouse -
Certificate No. 0255
Use of Instructions
Warning.
An instruction that draws attention to the risk of
injury or death.
Caution. An instruction that draws attention to the risk of
the product, process or surroundings.
Note.
Clarification of an instruction or additional
information.
Although Warning hazards are related to personal injury, and Caution hazards are associated with equipment or property damage, it
must be understood that operation of damaged equipment could, under certain operational conditions, result in degraded process system
performance leading to personal injury or death. Therefore, comply fully with all Warning and Caution notices.
Information in this manual is intended only to assist our customers in the efficient operation of our equipment. Use of this manual for any
other purpose is specifically prohibited and its contents are not to be reproduced in full or part without prior approval of ABB Inc..
Licensing, Trademarks and Copyrights
MODCELL, MOD 30 and MOD 30ML are trademarks of ASEA Brown Boveri, Inc.
MODBUS is a trademark of Modicon Inc.
Health and Safety
To ensure that our products are safe and without risk to health, the following points must be noted:
1. The relevant sections of these instructions must be read carefully before proceeding.
2. Warning Labels on containers and packages must be observed.
3. Installation, operation, maintenance and servicing must only be carried out by suitably trained personnel and in accordance with the
information given or injury or death could result.
4. Normal safety procedures must be taken to avoid the possibility of an accident occurring when operating in conditions of high
pressure and/or temperature.
5. Chemicals must be stored away from heat, protected from temperature extremes and powders kept dry. Normal safe handling
procedures must be used.
6. When disposing of chemicals, ensure that no two chemicals are mixed.
Safety advice concerning the use of the equipment described in this manual may be obtained from the Company address on the back
cover, together with servicing and spares information.
Information. Further reference for more detailed
information or technical details.
‘
i !
∆