Micromod MOD: ICN OPC Server Users Guide - Manual (Page 18)

ICN OPC Server
Application Tutorial
Figure 3 .3.
Modcell Interface
File
• Click on the button next to the File Name field. A file selection dialog box as
shown below will appear next. Browse for the folder that has the .MIF file from
this dialog box and then select it. This is the file you generated while compiling
your database.
Figure 3 .4.
Port Properties
• Click on the Open button on this dialog box. This will attach the tags that are in
the .MIF file (tags that are configured in the CL - Configured List block) to the
device we just added.
If you do not have a MIF file to specify, you can click on the Cancel button on the
Modcell Interface File dialog box above. You can add the MIF file later if needed, by
selecting the device and then right-clicking on it and then selecting Import Modcell
Interface from the menu that appears.
3. Configure the serial port for the communication: Click on the Edit – Ports from the
menu bar. The Port Properties dialog box will be displayed as shown below:
3 - 4