Minuteman Kleen Sweep 40R-47R HM50QP - Manual (Page 12)

Safety Information
1.6 Maintenance Instructions
A good approach to prevention of acci-
dents is proper maintenance of the ma-
chine.
Before proceeding to repair or mainte-
nance work remove the ignition key.
Use appropriate tools for maintenance,
service, setting etc.
As far as aspects of safety are concer-
ned, spare parts will have to be at least
of the same quality as the genuine spa-
re parts.
Switch off the motors
before maintaining the
machine or replacing
parts of it.
Check hydraulic lines
and hoses for damages
and leakage in regular
intervals; replace defec-
tive hoses and lines im-
mediately!
Before changing wheels
protect the machine
against rolling by pla-
cing blocks. Proceed to
wheel changing when
the machine is on level
and solid ground.
Do not repair the pneu-
matic tires mounted to
the machine yourself.
Dismount the wheel and
take it to repair by pro-
fessionals.
Use of other than the cy-
linder brooms and side
brushes approved by
the manufacturer is not
acceptable (see techni-
cal data) since use of
other cylinder brooms
and side brushes may
affect your safety.
When handling lubrica-
ting agents, the applica-
ble regulations for pro-
tection of the
environment and pre-
vention of fire have to be
complied with. Provide
for disposal of used oil
and grease in accordan-
ce with the provisions
imposed by law.
Collect cleaning agents,
oil, fuel oil, grease etc.
and provide for adequa-
te disposal. Wipe away
spilled substances.
12