Minuteman Kleen Sweep 40R-47R HM50QP - Manual (Page 32)

Maintenance/Service
7.2 Mount/Dismount Cylinder
Broom
The cylinder broom is accessible from
the left side of the machine and is to be
dismounted as follows:
- Lower cylinder broom
- Remove ignition key and protect by
engaging parking brake
- Open lateral flap
- Remove cover
Fig. 10 Remove cover
- Open locks (Fig. 10/2) by enclosed
square spanner (counter-clockwi-
se)
- Remove cover (Fig. 10/1)
Fig. 11 Dismount Cylinder broom
- Loosen star knob (Fig. 11/2) and re-
move
- Remove cylinder broom seating
(Fig. 11/1)
- Turn handle (Fig. 11/3 + 5) upwards
and unlock
- Remove plate with sealing strip
(Fig. 11/4)
- Remove cylinder broom by pulling.
For mounting the cylinder broom pro-
ceed in inverse order.
7.3 Adjust Sweeping Track
An adjustment device allows adaptation
to the different sweeping conditions.
The cylinder broom is to adjust accor-
ding to normal use and with regard to a
low degree of wearing as described in
the following.
Check the broom adjustment on level
ground as described in the following:
2
1
1
2
3
4 5
32