Minuteman Kleen Sweep 40R-47R HM50QP - Manual (Page 35)

Maintenance/Service
7.5 Replace Side brush
The side brush is located at the front
right of the machine (standard version).
Use the lever (Fig. 10/2) to lift and lower
the side brush. The side brush is to be
lightly inclined in forward and in outward
direction. The pivoting area of the side
brush arm is limited by stop screws.
The side brush is driven by a V-belt. Fit-
ting of a second side brush for specific
appliances is possible.
Proceed as follows for dismounting of
the side brush:
Fig. 15 Replace side brush
- Turn engine off and remove key.
- Secure machine by engaging parking
brake
- disconnect battery plug
- Remove right-hand cover (as descri-
bed in the paragraph “Dismount/
Mount Cylinder Broom”).
- Side brush lifted
- Loosen hexagonal nut (Fig. 15/1) und
remove together with washer
- Remove bolt (Fig. 15/2)
- Remove side brush
Proceed in inverse order for mounting
of the side brush.
35