Maintenance record – MotorVac CarbonClean System II LE-1 User Manual
Page 36
Overview
1998 MotorVac Technologies,
xxxv
Replace the Fuel Filter
1.
Remove the old fuel filter from the mounting station on the back of the unit’s
cabinet and install
the new filter.
Verify correct direction of the arrow for fuel flow.
2.
Tighten the clamps securely to prevent any spills.
3.
Add the mixture back into the LE-1’s reservoir.
4.
Check the filter for leaks.
5.
Enter your initials, the date, and a check mark in the appropriate boxes of the Maintenance
Record at the end of this chapter.
The unit is now ready for the next cleaning service.
Maintenance Record
Use the following table to keep a record of maintenance performed on the
LE-1
.
Initial/Date
DRAIN FUEL
RESERVOIR
9
REPLACE FUEL
FILTER
9
CLEAN EXT.
CABINET
9
CHECK HOSES
AND WIRES
9
OTHER
9
/
/
/
/
/
/
/
/
/
/
/
/
/