MotorVac CarbonClean Dual System MCS 352 - Manual (Page 10)

Chemicals can cause harmful byproducts.
Use only approved chemicals (refer to operator’s manual).
Do not swallow or ingest any chemicals.
Use with adequate ventilation. Avoid breathing vapors.
Do not store chemicals on or in the machine.
Improper use of chemicals can cause injury.
Over exposure can have harmful effect on eyes, skin, respiratory system and possible
unconsciousness and asphyxiation.
Improperly blocked vehicles can move.
Set the parking brake and chock the wheels.
Moving vehicles can cause injury.
Moving engine parts.
The engine-cooling fan will cycle on and off depending on the coolant temperature and could operate
without the engine running.
Wear safety goggles.
Always keep objects, clothing, and hands away from the cooling fans and engine parts.
Moving engine parts can cause injury.
Hot surfaces are present during and after running the engine.
Do not contact hot surfaces such as, manifolds, pipes, mufflers, catalytic converters or
radiators and hoses.
Hot surfaces can cause injury.
Catalytic converters become extremely hot.
Do not park a converter-equipped vehicle over dry grass, leaves, paper, or any other
flammable material.
Do not touch a catalytic converter until the engine has been off for at least 45 minutes.
For tests allowing unburned hydrocarbons or service involving operation of an overly rich
condition, minimize the time of rich operation, monitor the catalytic converter temperature,
and allow at least two minutes of operation at normal mixture subsequent to testing or service
for converter cooling.
Catalytic converters can cause burns.
Cracked fan blades can become airborne.
Examine fan blades for cracks. If found, do not service the vehicle.
Flying objects can cause injury.
See next page