Multichannel Systems NeuroExplorer User Manual
Page 116
Add to Results / Bin
right
An option to add an additional vector (containing a right edge of each
frequency bin) to the matrix of numerical results.
Send to Matlab
An option to send the matrix of numerical results to Matlab. See also
.
Matrix Name
Specifies the name of the results matrix in Matlab workspace.
Matlab command
Specifies a Matlab command that is executed after the numerical results
are sent to Matlab.
Send to Excel
An option to send numerical results or summary of numerical results to
Excel. See also
Sheet Name
The name of the worksheet in Excel where to copy the numerical results.
TopLeft
Specifies the Excel cell where the results are copied. Should be in the form
CR where C is Excel column name, R is the row number. For example, A1
is the top-left cell in the worksheet.
Summary of Numerical Results
The following information is available in the Summary of Numerical Results
Column
Description
Variable
Variable name.
Y Min
Y axis minimum.
Y Max
Y axis maximum.
Color Scale Min
Color scale minimum.
Color Scale Max
Color scale maximum.
Max Frequency Used
Maximum frequency of the FFTs used.
Rate Histogram Bin
Rate histogram bin size in seconds (if used).
Number of Ref. Events
Number of reference events.
Window width
FFT window width (seconds).
Actual shift
Actual window shift used in analysis.
Number of Bins In Shift
Number of rate histogram bins in shift (if rate histograms were used).
Algorithm
For each selected variable, this analysis calculates multiple spectrograms that start at the specified
time after each occurrence of the Reference event. These spectrograms are then averaged over all
the reference events. Spectrogram calculation algorithm is described in
.
Page 114