Joint isi distribution – Multichannel Systems NeuroExplorer User Manual
Page 117
2.35. Joint ISI Distribution
For each spike, a point is calculated where the X coordinate of the point is the current interspike
interval and Y coordinate of the point is the preceding interspike interval. The density of these points
is shown in the graph.
Parameters
Parameter
Description
Min Interval
Time axis minimum in seconds.
Max Interval
Time axis maximum in seconds
Bin
Bin size in seconds.
Log Axis Scale
An option to use Log10 axis scales.
Matrix Scale
Matrix color scale.
Smooth Matrix
An option to smooth matrix after calculation.
Smooth Radius
Radius of the smooth filter (in bins).
Smooth Colors
An option to smooth colors using bicubic splines.
Log Color Scale
An option to use Log10 color scale.
Select Data
If Select Data is From Time Range, only the data from the specified (by
Select Data From and Select Data To parameters) time range will be used
in analysis. See also
.
Select Data From
Start of the time range in seconds.
Select Data To
End of the time range in seconds.
Interval filter
Specifies the interval filter that will be used to preselect data before
analysis. See also
Add to Results / Bin left An option to add an additional vector (containing a left edge of each bin) to
the matrix of numerical results.
Add to Results / Bin
middle
An option to add an additional vector (containing a middle point of each
bin) to the matrix of numerical results.
Add to Results / Bin
right
An option to add an additional vector (containing a right edge of each bin)
to the matrix of numerical results.
Send to Matlab
An option to send the matrix of numerical results to Matlab. See also
.
Matrix Name
Specifies the name of the results matrix in Matlab workspace.
Matlab command
Specifies a Matlab command that is executed after the numerical results
are sent to Matlab.
Send to Excel
An option to send numerical results or summary of numerical results to
Excel. See also
Sheet Name
The name of the worksheet in Excel where to copy the numerical results.
TopLeft
Specifies the Excel cell where the results are copied. Should be in the form
CR where C is Excel column name, R is the row number. For example, A1
is the top-left cell in the worksheet.
Page 115