Multichannel Systems NeuroExplorer - Manual (Page 122)

•
•
•
In this mode, you can add, delete and edit page graphics objects, i.e. the graphics elements that you
want to have on the page.
Each graph in the page, however, has its own set of graphics objects. Thus, the default graph usually
contains the text label that displays the variable name (Neuron04a in this picture):
To edit the properties of the graphical objects (like the label "Neuron04a" above) that belong to the
graph, you need to switch the Graph Window to the Graph Mode.
Use Graphics | Edit Graphics | Graph Layout Mode and Graphics | Edit Graphics | Page Layout
Mode menu commands to switch the graphics mode in NeuroExplorer. You can also use the
following toolbar buttons to switch the graphics modes:
The left button will switch the Graph Window to the Page Mode, the right button will switch it to the
Graph Mode.
Here is the typical picture in Graph Mode:
Only one graph is visible in this mode. While in the Graph Mode, you can select, drag, resize and edit
the graphical objects that will appear in every graph.
For example, to move the variable name label to a different position relative to the graph:
Switch to the Graph Mode as described above
Click on the text label to select it
Drag the label to a different position:
Page 120