Burst analysis – Multichannel Systems NeuroExplorer User Manual
Page 90
2.24. Burst Analysis
This analysis identifies bursts in spike trains. For each spike train (neuron variable), a new interval
variable is created that contains the time intervals corresponding to bursts.
Parameters
Parameter
Description
Algorithm
Selection of MaxInterval or Surprise algorithms.
Max Interval
Maximum interspike interval to start the burst (in seconds, MaxInterval
method).
Max End Interval
Maximum interspike interval to end the burst (in seconds, MaxInterval
method).
Min Interburst Interval
Minimum interval between bursts (in seconds, MaxInterval method).
Min Burst Duration
Minimum burst duration (in seconds, MaxInterval method)
Min Number of Spikes
Minimum number of spikes in the burst (MaxInterval method).
Min Surprise
Minimum surprise of the burst (Surprise method).
Rate Histogram Bin
The value of the bin for the burst rate histogram (in seconds).
Rate Histogram Units
Histogram units (Counts/Bin, Probability or Spikes/Second). See
Select Data
If Select Data is From Time Range, only the data from the specified (by
Select Data From and Select Data To parameters) time range will be used
in analysis. See also
.
Select Data From
Start of the time range in seconds.
Select Data To
End of the time range in seconds.
Interval filter
Specifies the interval filter(s) that will be used to preselect data before
analysis. See also
Send to Excel
An option to send numerical results or summary of numerical results to
Excel. See also
Sheet Name
The name of the worksheet in Excel where to copy the numerical results.
TopLeft
Specifies the Excel cell where the results are copied. Should be in the form
CR where C is Excel column name, R is the row number. For example, A1
is the top-left cell in the worksheet.
Page 88