Multichannel Systems STG4004+STG4008 Manual - Manual (Page 28)

Stimulus Generator 4000 Series Manual
24
In the following example, the stimuli on output channels 1, 3, and 6 that are all triggered by
Trigger 1 are repeated three times after the trigger event, each time accompanied by the
Sync Out 1 output. All other stimuli are applied once after their respective trigger event.
Repeating complete pulse protocols, Gating Trigger
Repeated stimulation of complete protocols can also be controlled by a gating trigger. Channels
associated with a Trigger input will be active as long as the condition of that Trigger is 1 (HIGH)
and switched off as soon as the condition becomes 0 (LOW). Gating trigger function can be
enabled in the Trigger Settings menu.