Multichannel Systems STG4004+STG4008 Manual - Manual (Page 59)

General Software Features
55
Hint: Shortcut key combinations are also listed on the toolbar menus. For example, the File menu
shows that the shortcut key for Save is CTRL+S .
9.5 File Menu
You can save MC_Stimulus II files for later use. This is very convenient if you have various similar
experimental setups, or if you like to repeat an experiment later.
Open a file
You may open previously saved files for similar experimental setups.
1. On the File menu or on the toolbar, click Open .
2. Browse your folders and choose the desired file. You may only open MC_Stimulus II files (*.stm).
3. Click Open. The selected file opens.
Save a file
1. On the File menu or on the toolbar, click Save . The currently active worksheet is now saved.
You may open the file using MC_Stimulus II later on to continue your experiment.
Save as
Use this command to save your file under a new name, for example, if you like to use a file as
a template for a new file.
1. On the File menu, click Save As.
2. Browse your folders and enter a file name.
3. Click Save. The current worksheet is now saved under the new name.
You may open the file using MC_Stimulus II later on to continue your experiment.
Import ASCII File
Please see the chapter " ASCII Import / Export".
Export ASCII File
Please see chapter "ASCII Import / Export"
Printing a channel
1. On the File menu, click Print Setup to select a printer, paper format, and so on.
2. Click Print Preview to preview the print output.
3. Click Print to print out the active channel of the active worksheet.