Multichannel Systems STG4004+STG4008 Manual - Manual (Page 35)

Programming Stimulus Protocols
31
The column is filled according to the specifications.
5.7 Auto Sync for Autocreating Trigger Pulses
If you want to synchronize other devices, for example, a MEA1060-BC amplifier or the MC_Card
with the stimulus generator, you have to set up the digital output of the Sync Out channels in
synchrony to the stimulus pulses. This may sometimes be a bit tricky and time consuming,
especially for complex stimulus protocols.
The Auto Sync feature is intended for making the work with MC_Stimulus more efficient: Digital
Sync Out TTL pulses synchronous to stimulus pulses are generated automatically by this feature.
Each time an analog channel generates a pulse (that is, its value is not equal to zero), the logical
state of the assigned Sync Out channel is set to HIGH (=1). You can set the time offset of the
TTL's rising edge before the stimulus pulse and of the TTL's falling edge after the pulse.
If you change the stimulus protocol, corresponding Auto Sync pulses are updated on the fly.
This feature is especially recommended for controlling the MEA1060-BC amplifier with superior
stimulus artifact suppression.
1. On the Edit menu, click Auto Sync Settings. The Auto Sync Settings dialog box appears.