ADT Security Services Safewatch Pro 2000 - Manual (Page 21)

– 21 –
PANIC KEYS
(FOR MANUALLY ACTIVATING SILENT AND/OR AUDIBLE ALARMS)
Using
Panic Keys
* If connected to the
Customer Care Center.
Your system may have been programmed to use special keys to manually activate
emergency (panic) functions. The emergency functions that can be programmed are:
Silent Emergency, Audible Emergency, Personal Emergency, and Fire.
Activating a silent emergency sends a silent alarm signal to the Customer Care Center,*
but there will be no audible alarm or any visual display indicating that a silent alarm has been
initiated.
Activating an audible emergency sends a signal to the Customer Care Center* and
sounds a loud, steady alarm at your touchpad(s) and at any external sounders that may be
connected (ALARM plus a zone number is also displayed).
Activating a personal emergency alarm sends an emergency message to the Customer
Care Center* and sounds at touchpad(s), but not at external bells or sirens.
Activating a Fire Alarm will send a fire alarm message to the Customer Care Center* and
will uniquely sound external bells and sirens.
TYPICAL DISPLAYS WHEN A PANIC KEY THAT HAS BEEN
PROGRAMMED FOR “AUDIBLE EMERGENCY” IS PRESSED.
ALA RM 99
99
ALARM
AC
NOT READY
NOTE: Zone 99 is the zone
number displayed when an Audible
Emergency alarm is initiated via a
Panic key
CUSTOM DISPLAY TOUCHPAD ENGLISH DISPLAY TOUCHPAD
To Initiate a Panic
Function at Any Time
Press any individual lettered key (A, B, or C) that has been programmed for the desired
emergency function for at least 2 seconds. See the chart on the next page for
functions that have been programmed for the various keys in your
system.