ADT Security Services Safewatch Pro 2000 - Manual (Page 33)

– 33 –
FIRE ALARM SYSTEM (Continued)
Manually Initiating
a Fire Alarm
1. Should you become aware of a fire emergency before your detectors sense the
problem, go to your nearest Touchpad and manually initiate an alarm by pressing the
panic key assigned for FIRE emergency for 2 seconds. Check below, and in the
PANIC KEYS section.
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify your local Fire
Department immediately.
4. If no flames or smoke are apparent, investigate the cause of the alarm. The zone
number(s) of the zone(s) in an alarm condition will be displayed at the Touchpad.
Panic Key Assigned
for FIRE Emergency The “A” key has been assigned for manually initiating a FIRE alarm.
Important: Verify this with your installer.
Press A for 2 seconds.
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
FIRE 95
95
ALARM
F I R E
AC
CUSTOM DISPLAY TOUCHPAD ENGLISH DISPLAY TOUCHPAD