ADT Security Services Safewatch Pro 2000 - Manual (Page 22)

– 22 –
PANIC KEYS (Continued)
See your installer and note here any functions programmed for your system.
CHECK IF PANIC ZONE
ACTIVE KEY(S) PLACE A CHECK NEXT TO PROGRAMMED FUNCTION DISPLAY
[A] ___SILENT, ___AUDIBLE, ___PERSONAL, ___FIRE, ___ARM AWAY * 9 5 †
[B] ___SILENT, ___AUDIBLE, ___PERSONAL, ___FIRE, ___ARM STAY * 9 9 †
[C] ___SILENT, ___AUDIBLE, ___PERSONAL ___FIRE. 96
NOTE: KEY [D] DOES NOT PROVIDE A PANIC FUNCTION (SEE “SINGLE-BUTTON PAGING FEATURE” SECTION BELOW).
* KEYS [A] AND [B] MAY HAVE BEEN PROGRAMMED FOR SINGLE-BUTTON ARMING INSTEAD OF AN EMERGENCY
FUNCTION, AS SHOWN.
† THIS ZONE NUMBER NOT DISPLAYED IF KEY HAS BEEN PROGRAMMED FOR SINGLE BUTTON ARMING (ARM-AWAY or
ARM-STAY)
SINGLE-BUTTON PAGING FEATURE
The “D” key on the touchpads can be used to send a signal to a Pager (check if this feature has
been programmed in your system). The message displayed on the Pager when the “D” key is
pressed is
999–9999 . This code could mean “call home”, “call your office”, or other message. A
prearranged meaning for this signal should be agreed upon. See the illustration on page 12 for the
location of the “D” key.
To send a signal to the Pager, simply press the “D” key for at least 2 seconds. The recipient, on
seeing the
999–9999 display, will understand the pre-arranged meaning of this signal.