PASCO SPARKvue ver.2.0 - Manual (Page 104)

4. Click OK.
A new table appears displaying the empty data set ready for data entry.
5. Enter data. See "Entering data into a manual data set": 92 .
Entering data into a manual data set
After creating a data set (see "Creating a data set for manual entry": 91 ), complete these
steps to enter data:
1. Click the Table Tools button to open the tool palette.
2. Click the column header for the User-defined data.
3. Select the data set.
4. Click a cell and enter the data.
5. Enter data in a cell:
a. Click the first table cell where you want to enter data.
b. Enter a number or text (depending on what type of data set you created).
6. Repeat the previous step to enter data in other cells.
Displaying manually entered data
Once you have created a data set, it is available to be shown in any data display.
Complete these steps to select the data set for display.
i. Touch the Display Tools button near the lower or upper left corner of the display.
ii. Touch the Properties button.
1. Click the Measurement box and click the data set.
2. Click OK.
Document Number: 012-11074D 92
SPARKvue
®
8 Calculations and manually entered data
Entering data into a manual data set