PASCO SPARKvue ver.2.0 - Manual (Page 49)

Note : this tool will already be active when a bar graph is first created.
2. Click the bar with muted color.
3. Click the default bar name above the numeric keypad, such as Bar 1
4. Click in the bar name box, delete the old name, and enter a new name.
5. Click OK.
A new placeholder bar is automatically added.
6. To name the new bar, click it, and repeat steps 2 through 4.
7. Continue adding the bars you need.
8. When you finish adding bars, click the Bar Add and Edit button to turn off the tool.
Turning this tool off removes the last placeholder bar.
Editing bars and bar names in bar graphs
1. Open Properties:
i. Touch the Display Tools button near the lower or upper left corner of the dis-
play.
ii. Touch the Properties button.
2. Click the Bar Edit button.
3. Click the bar you want to edit.
The bar edit menu opens.
4. Click in the bar name box, delete the old name, and enter a new name.
5. Click OK.
Adding data in bar graphs
You can add data to bars either manually or through collecting data using a sensor.
n
"Entering data into bar graph manually": 38
n
"Collecting data for bar graph using a sensor": 38
Document Number: 012-11074D 37
SPARKvue
®
5 Data display
Displaying data in a bar graph