Agilent Technologies 8510XF - Manual (Page 10)

10
Upgrading the 8510 to the 8530 microwave receiver for
antenna measurements
Figure 7 below illustrates how the 8510C can be upgraded to either an 8530A
or 8530A and 8510C. For example, to upgrade an 8510C to an 8530A, order
85395C with Option 111.
Figure 7. 8510 to 8530 upgrade paths
Agilent 85395C 2 Upgrades any 8510C to an 8530A. Retains network analyzer
capability. Includes on-site installation by Customer Engineer (where
available). Other requirements may apply (such as 8530 firmware).
1
The following options are available:
Option 010 adds time domain capability
Option 111 deletes network analyzer capability
Agilent 85396A Adds 8510C Network Analyzer capability to any 8530A
(equivalent to 8530A Option 011).
Option 010 adds time domain capability
8510C
8530A
microwave receiver
and
8510C
network analyzer
capability
8530A
microwave
receiver
85395C
2
Opt.111 85395C
2
85396A
1. For additional information, please refer to the Agilent 85395A/B/C and 85396A Upgrade Kits,
literature number 5091-0948E.
2. Requires an 85101C with serial prefix 3936A or lower