Agilent Technologies 8510XF - Manual (Page 6)

6
Table 2. Firmware revision and measurement capability
Revision Time domain 1 Pulse 2 Power domain Other added key features
limit lines
A.02.00
B.03.00 • Adapter removal calibration
• Direct control of two sources
B.03.11 • Direct control of up to 4 test sets
B.04.00 • 40 GHz test set capability
• Frequency subset calibration
B.05.00
B.05.11 • Lightwave data format
B.06.30 • 50 GHz source/test set compatibility
B.06.54
C.06.00 • Color display
• Support for hardcopy printer plots
C.06.54 • Color printer capability
C.07.00 • Connector compensation
C.07.01
C.07.14 • Y2K compliance
C.07.16 • CRT
C.08.10 • LCD
Agilent 8510 Firmware upgrade kits
Figure 5 diagrams which product to order (numbers shown above arrows)
to upgrade the existing firmware. For example, to upgrade Rev. C.06.54 to
Rev. C.07.XX, order 11575J.
Rev. C.06.00
Rev. C.06.50
Rev. C.06.54
Rev. C.07.XX
11575J
11575J
8510C
Note: Upgrade kit 11575J has Option 010 (time domain) available.
If you currently have time domain, you must order Option 010.
Figure 5. 8510 firmware upgrade kits
1. Time domain capabilities require Option 010 on the 8510. Time domain option can be upgraded by ordering
85012C for 8510C.
2. Pulse capabilities require Option 008 on the 8510 working with either 85110L or 85110A pulsed-RF S-parameter
test set. Pulse option on the 8510 can be upgraded by ordering 85111B for 8510C. Pulse capability is not available
with 8510A or 8510B.