Agilent Technologies 8510XF - Manual (Page 14)

14
Upgrades for 85107B, 85109C
Upgrade consists of two test heads, a millimeter test set controller, an 83621B
for LO source, and rack. It does not include calibration kits or test port cables.
E7345A upgrade to an 8510XF 85 GHz system
E7355A upgrade to an 8510XF 110 GHz system
The following options are available for both upgrades:
Option 005 add 45 MHz to 2 GHz low frequency extension
Option 006 add RF pass thru (provides coupled output of 50 GHz
source for additional test sets. Additional test set(s) must have Option
001 installed.)
Upgrades for 85106C, 85106C with Option 002 (replaced 8350B/83540A with
83621A/B), 85106D
Upgrade consists of two test heads, a millimeter test set controller and an
83651B for RF source. It does not include calibration kits, test port cables
or rack.
E7346A upgrade to an 8510XF 85 GHz system
E7356A upgrade to an 8510XF 110 GHz system
The following options are available for both upgrades:
Option 005 add 45 MHz to 2 GHz low frequency extension
Option 006 add RF pass thru (provides coupled output of 50 GHz
source for additional test sets. Additional test set(s) must have Option
001 installed.)
Upgrades for 85106C with Options 001 and 002 (added 8517B, replaced 83621A/B
with 83651A/B, and replaced 8350B/83540A with 83621A/B),
85106D with Option 001 (added 8517B and replaced 83621B with 83651B),
85109C with Option 002 (replaced 8350B/83540A with 83621A/B)
Upgrade consists of two test heads and a millimeter test set. It does not
include calibration kits, test port cables or rack.
E7347A upgrade to an 8510XF 85 GHz system
E7357A upgrade to an 8510XF 110 GHz system
The following options are available for both upgrades:
Option 005 add 45 MHz to 2 GHz low frequency extension
Option 006 add RF pass thru (provides coupled output of 50 GHz
source for additional test sets. Additional test set(s) must have Option
001 installed.)