Agilent Technologies 8510XF - Manual (Page 4)

4
8510
VNA
system
Source
8360
Test set
851X
Receiver/detector
8510
processor/display
network
analyzer
Signal
separation
Stimulus
=
+
+
Figure 3. 8510 measurement systems are made up of modular components, the 8510
network analyzer, a test set and a compatible source.
The Agilent Technologies 8510 network analyzer consists of a family of
compatible products where each part is a separate system component. Each
complete system includes the 8510 network analyzer, a test set, and compatible
sources (measurement accessories are also needed to complete the measure-
ment setup), shown in Figure 3. The frequency range of the measurement sys-
tem is determined by the test set or the compatible source’s lesser frequency.
Example: if a 50 GHz test set is used with a 20 GHz source, the maximum
frequency measured is 20 GHz.