3 step 3 – network mode, 4 step 4 – security – PROLiNK WNR1004 Wireless-N User manual User Manual

Page 14

Advertising
background image

PROLiNK® WNR1004 User Manual

www.prolink2u.com


Revision 1.0 (Apr’09)

11

DHCP Lease Time The lease time of the distribute IP Addresses. Default settings are 86400 seconds.

3.3.3 Step 3 – Network Mode

This step can set up wireless network mode, network name and channel.

Network Mode

Select 11b/g mixed, 11b only, 11g only, or 11b/g/n mixed mode from the pull-down menu.

(Default is 11b/g/n mixed mode.)

Network (SSID)

A SSID is referred to a network name because essentially it is a name that identifies a wireless

network.

Frequency (Channel)

Select 1~11 or Auto Select from the pull-down menu.

3.3.4 Step 4 – Security

Here can set up the wireless security of the Wireless Portable Router.

Select desired security type from the pull-down menu Disable, OPEN, SHARED, WEP AUTO, WPA-

PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK. The default setting is Disable. It is strongly

recommended to set up security mode (OPEN, SHARED, WEP AUTO, WPA-PSK, WPA2-PSK, WPA-

PSK/WPA2-PSK) to prevent any unauthorized accessing.

Advertising