PROLiNK WNR1004 Wireless-N User manual - Manual (Page 19)

PROLiNK® WNR1004 User Manual www.prolink2u.com
Revision 1.0 (Apr’09)
16
3.4.2 LAN
IP Address Shows the IP address of the Wireless Portable Router (Default IP address is
192.168.10.254.)
Subnet Mask The subnet mask of the Wireless Portable Router (Default subnet mask is
255.255.255.0.)
MAC Address Shows the MAC address of this Wireless Portable Router.
DHCP Type Disable: Select to disable this Wireless Portable Router to distribute IP addresses to
connected clients.
Server: Select to enable this Wireless Portable Router to distribute IP Addresses
(DHCP Server) to connected clients. And the following field will be activated for you
to enter the starting IP Address.
Start IP Address The starting addresses of this local IP network address pool. The pool is a piece of
continuous IP address segment. Keep the default value 192.168.10.100 should work
for most cases.
End IP address The end IP address, the maximum is 253. Default value 253 should work for most
cases (192.168.10.253.) If “Start IP Address” is set at 192.168.10.100 and the “End IP
address” is 192.168.10.253, the device will distribute IP addresses from