KISAE IC1230150 Inverter-Charger 3000W - Manual (Page 15)

Page 15
7. SPECIFICATIONS
Note: Specifications are subject to change without notice.
Specification
A bso Inverter-Charger
3000
Inverter
AC Output Power
3000W
AC Output Current 25A
AC Surge Power (Peak) 6000W (5 seconds)
AC Output Voltage/Frequency 120 VAC / 60 Hz
AC Output Waveform True Sinewave (<5% THD)
Nominal DC Input Voltage 12.5 VDC
No Load battery draw < 3.5 A nominal, <1A with load sense
DC Input Voltage Operating Range 11.0 - 16.0 VDC
Under Voltage Alarm 11.8 VDC
Under Voltage Alarm Recovery 12.2 VDC
Under Voltage Shutdown 10.5 VDC
Under Voltage Recovery 11.5 VDC
Over Voltage Shutdown 16.5 VDC
AC Transfer Switch
Transfer Time
< 20 ms
Transfer Relay Rating 30A
AC Input Source Current Setting (SCR set) 15, 20, 25A, 30A
AC Input L1, N1 30A
AC Output Line 1 (L1, N1) and Line 2 ( L2, N2) 30A
Remote Display
Display Panel Port
RJ45 socket
LCD Display AC Input / Output Voltage & Current
DC Input / Output Voltage & Current
Battery Temperature Sensor Port
BTS Port
RJ45 socket
Charger
Charging Voltage Range
7.0 – 16.0 VDC
Floated Voltage Range 13.45 – 13.8 VDC
Charging Control 3 Stages (Bulk/Absorption/Float)
Charger Current (max) 150A
Charger Current Setting 60A – 150A
Equalization Voltage (Flooded battery setting) 16.0 VDC
Equalization Current (Flooded battery setting) ½ Bulk Current (min 30A, max 75A)
Efficiency >80%
Safety and Environmental
Conformance
Conforms to UL 458
Certified to CSA C22.2 no. 107.1
Agency Markings cETLus
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Relative Humidity 5-90% noncondensing
Operating Altitude Up to 9,843ft (3000m) above sea level
Weights and Dimensions
Weights
66 lb (30 kg)
Dimensions 15.4 x 13.4 x 7.8” (392x340x197mm)