KISAE IC1230150 Inverter-Charger 3000W - Manual (Page 5)

Page 5
1. INTRODUCTION
Thank you for purchasing the KISAE A bso Inverter-Charger. With our state of the art,
easy to use design, this product will offer you reliable service by providing AC power for your home,
cabin, boat, RV or Trailer and recharge your battery automatically when utility AC is available. The
sinewave output inverter can run many AC-powered appliances when you need AC power
anywhere. The multi-stage battery charger will charge different types of batteries. The transfer
switch will automatically switch the load to the battery power when the utility power is interrupted.
Feature Highlights
• The inverter provides true sinewave output power for your microwave, entertainment system,
computer and other loads. The AC output power is identical to the AC power provided by the
utility grid. It can handle sensitive loads such as dimmer switches and appliances with speed
controls.
• High surge power to start difficult load like sump pumps, refrigerators, or A/C compressors.
• The battery charger has high output, multi-stage charging capability to minimize charging time.
The Power Factor Corrected (PFC) input minimizes AC input current required for charging.
• Optional Battery Temperature Sensor (BTS) is available and used to sense the battery
temperature to correct charging voltage to ensure the battery is fully charged.
• A Manual Equalization Mode is built-in to improve the life and performance of flooded batteries.
• The charger can charge dead batteries as low as 3 volts.
• During utility mode, the built-in AC load sensing circuit will automatically reduce charging current
if there is a high demand on AC load. This avoids the tripping of the shore circuit breaker.
2. PRODUCT DESCRIPTION
The KISAE Abso Inverter-Charger includes the items list below.
• Inverter-Charger base unit
• Remote Display
• 25 ft (7.6 m) remote display cable
• Owner’s manual (P/N: MU IC1230)
Understanding the unit features
Front Panel
AC Wiring Compartment
Battery Temperature
Sensor (BTS) port
Remote 1 Port
Remote 2 Port
DC Input Terminal +
DC Input Terminal -
AC Input 1 (30A)
AC Output (30A)
AC Input 2 (30A)
AC Wiring
Compartment
AC Input wire
opening
AC output wire
opening
AC Output 1
AC Output 2
AC GND bus for AC
Output 1 and 2 AC Input 1
AC Input 2
AC GND bus for AC
Input 1 and 2