SecurityMan Air-AlArm1 - User manual - Manual (Page 4)

1
introduction
SecurityMan Air-Alarm1 is a state-of-the-art wireless alarm system kit for homes and businesses. It is user-friendly and easy to use protecting homes/
businesses at a minimum cost of investment. Do-It-Yourself installation and monitoring alarm system without monthly fees is a key benefit for users. The
system will alert by phone calls to owner through a series of enlisted phone numbers. The owner can then dial into the host to arm or disarm the alarm by
using the phone’s numeric keypad. The Air-Alarm1 system can be upgraded by adding up to 60 wireless sensors, sirens, and up to 8 remote controllers.
Package Contents
1 x Air-Alarm1 host with built-in LEDs, keypad, and speaker. •
1 x Host Anchor Card for Fixed Position. •
1 x 12VDC Power Adapter •
1 x Wireless Wide-Angle PIR Motion Sensor with Mounting Bracket (Battery Included) •
1 x Wireless Magnetic Door/Window Sensor with Mounting Bracket (Battery Included) •
1 x Wireless Indoor Siren •
2 x Wireless Remote Controller (Battery Included) •
1 x Phone Cable(3ft) •
1 x Warning Sign •
1 x User’s Manual •
Accessories (on page 22) •
main features
Easy-to-use and cost-effective D.I.Y. (do-it-yourself ) wireless intruder alarm system kit. •
Supports up to 60 wireless sensors (15 wireless defense zones and 4 wireless sensors per zone). •
Transmit at 430-433MHz frequency band, wireless transmitting distance up to 300 feet (remote controller, smoke sensor, and siren) and up to 450 •
feet (magnetic door/window sensor & PIR motion sensor)
Supports up to 5 phone numbers for auto alarm call and 1 management center protocol (CID). •
Armed/disarmed by remote controller, phone call, or host’s keypad. •
Easy “one-key” armed/disarmed operation. •