SecurityMan LCDDVR4 - Manual (Page 10)

4
Note: This is volume control for the LCD monitor and it is the master volume con-
trol that dominates over the recorder’s volume control. If volume level is set
too high, the microphone gain from the camera may sound distorted.
The AUDIO menu is use to adjust the LCD volume level which dominates over
the recorder’s volume control level. Press the +/- buttons to increase/decrease
the volume level of the LCD monitor. The manufacture default volume level is set
at 27 percent. Press the MENU/POWER button 4 more times from the AUDIO
menu to exit out from the LCD Menu options.
Function
Press the MENU/POWER button 3 times to get to the FUNCTION menu setting
as shown below.
The FUNCTION menu is use to adjust the display ratio of the LCD screen. The
display ratio manufacture default setting is 16:9. Alternatively the ratio can be
Dis. Ratio: 16:9, 4:3 (default 16:9)
Note: In a 16:9 display ratio, it is normal for the images to zoom or stretch to a full
screen display. However, the 4:3 display ratio will display normal images on
the screen but will not display in full screen.