SecurityMan LCDDVR4 - Manual (Page 15)

9
frame-by-frame. To continue normal playback, press the PLAY button.
8) MENU/ESC button is use to access the main menu of the DVR. The main
menu is use to configure and setup parameter of the DVR. Press the ▲ UP/
▼ DOWN button to browse through the main menu. In playback mode, the
MENU/ESC button is use to access file backup panel. Press the MENU/ESC
button at anytime to exit out from the menu.
9) ▲ UP / ▼ DOWN button is use to browse/toggle or change a menu field. In
playback mode, the ▲ UP/▼ DOWN button is use to playback footages frame-
by-frame accordingly.
10) SEL/EDIT button is use to select and/or change the value in main menu or
sub menu setting.
11) PWR, HDD, & IR are light indicators and IR for the remote control. Color
light indicator and their meanings:
a) PWR: Solid green light DVR has power and it is up and running.
No light indicates the DVR is not powered on or power failure.
b) HDD: Constant flashing red light indicates the system is in Record
mode and/or in playback mode. No light indicates that the DVR is not
in record mode or in playback mode.
c) IR: The IR is the remote control receiver window. Remote control
needs to be pointing towards the IR receiver window for efficiency.
12) PTZ button is use to enter PTZ control screen. PTZ mode is used when
supported protocols camera are installed; currently supporting Pelco-P and
Pelco-D.