SecurityMan LCDDVR4 - Manual (Page 52)

46
Then press [Select] button to finish the order of Auto scan, the dome will run on
presets positions unless the [STOP]button is pressed on to stop Auto scan.
PTZ Mode
Select PTZ mode and then right mouse click in PTZ mode to bring up the Icon
function window as shown below.
Icon function window
▲▼►◄
: are directional movements for the dome: upward, downward,
leftward and rightward.
■
: Stop the dome from moving in auto scan mode.
: Focus image.
: Zoom in/out of view.
: Auto scan, require preset setup.
: Previous or exit from PTZ mode.
Attention
Once the Auto scan is activated to automatically scan through all the preset posi-
tions, the [STOP] button in PTZ mode must be press to exit out from Auto scan
mode. Just by exiting out from Auto scan without pressing the [STOP] button will
not stop the auto scanning.
From live view display, press the [PTZ] button on the front panel, RC or right
mouse click to select PTZ icon and then right click again to enter PTZ mode,
and then operate on screen Icon function to control the dome. Press the [PTZ]
button again to exit out from the PTZ mode.
F/W UPGRADE
From the main System menu browse down to F/W upgrade and then press
Select/Enter using the front panel, RC or left mouse click to access the F/W