SecurityMan LCDDVR4 - Manual (Page 12)

6
Preset
Press the MENU/POWER button 5 times to get to the PRESET menu setting as
shown below.
The PRESET menu is use to setup SLEEP and TIME (OFF-TIME, ON-TIME). In
PRESET menu press the UP/DOWN buttons to browse up and down the menu.
Press the + or - buttons to change the value or perimeter. The – button is use to
decrease the SLEEP value and increase the hour for TIME setting. The + button
is use to increase the SLEEP value and increase the minute for TIME setting.
SLEEP and TIME are two independent features; please use one or the other
feature. The SLEEP value can be set between 0~240 minutes with an increment
of 10 minutes, the default value is 0. SLEEP is a countdown timer; the time that
take for the LCD monitor to automatically turn off (not the DVR). The TIME mode
can be setup by first setting the current time of day for TIME value. Next, us-
ing the TIME setting as guidance, setup the OFF-TIME and ON-TIME setting to
automatically turn OFF and ON the LCD monitor respectively. Press the MENU/
POWER button one more time from the PRESET menu to exit out from the LCD
Menu options
SLEEP: 0~24 0Mins. (default 0)
TIME: setup current time (default --)
OFF-TIME: setup time for LCD to turn
off (default --)
ON-TIME: setup time for LCD to turn
on (default --)
Note: OFF-TIME has to exceed the TIME and ON-TIME. SLEEP (countdown timer)
and TIME (interval) feature works and operates independently.