SKC 224-44XR Universal Pump - Manual (Page 9)

7
Impinger holder on pump
with impinger and trap
Clip sampling medium
to worker and pump
to belt.
Sampling
For personal sampling, clip the
sample collection medium to the
worker in the breathing zone.
Before use, allow pump to
equilibrate after moving it from
one temperature extreme to
another.
Protect sample pump from
weather when in use outdoors.
Use of any device other than
the approved battery pack to
power the pump voids the UL
Listing for intrinsic safety and
any warranty.
Start the sampling period by turning
on the pump using the on/off switch
(Figure 1, #1), and record the start time.
At the end of the sampling period, turn off the pump and record the
stop time.
Sampling with Impingers
When using impingers, place an inline trap
between the pump and the impinger
to protect the sampler from liquid or
vapors. The impinger and trap can
be mounted to the sampler using the
accessory mounting screws (Figure
1, #5) or placed in a holster at the
worker’s waist.
Failure to use the impinger
trap voids any warranty.
Protect sample pump
from weather when in use
outdoors.
Use of any device other than the approved battery pack to
power the pump voids the UL Listing for intrinsic safety
and any warranty.
4
continued on page 8