Sonnet Technologies Crescendo_PCI Processor Upgrade Card - Manual (Page 125)

Remove Level 2 Cache Card
If your computer contains a Level 2 cache card,
remove it. In the PowerWave it is located directly
next to the Processor Card Slot (Figure 4-Label B).
Reset CUDA Switch
Reset the CUDA switch on the logic
board. It is located directly next to
the Level 2 cache card in the
PowerWave (Figure 4-Label C).
Resetting this switch ensures that a new upgrade
card is recognized at the next startup.
Install Crescendo/PCI Processor
Upgrade Card
1. Remove the Crescendo card from the anti-
static package, making sure to handle the card
by the edges (Figure 5). Your card may differ
from what is pictured below.
2. If your Crescendo card has a bracket, for Power
Computing computers you will need to adjust
the size of the card by removing the metal
bracket on the top of the card (Figure 6).
Unscrew the two bracket screws and remove
the bracket from the Crescendo card. Package
the two screws and the bracket in the
Crescendo’s anti-static package and store it
in a safe place.
En
7-6
Figure 4; Figura 4
Figure 5; Figura 5
B
A
C
anti-static
package
Crescendo card
Figure 6; Figura 6
bracket
screw
screw
PCI TriManual-Chapters 1-13 3/30/01 5:56 PM Page 107