Sonnet Technologies Crescendo_PCI Processor Upgrade Card - Manual (Page 43)

2. Insert the Crescendo/Encore Install diskette
into the floppy disk drive. Double click the
Crescendo/Encore Install icon. By default, with
“Easy Install” selected from the pop-up menu,
the required software will be installed into the
active System Folder on the boot drive. If this is
ok, click the Install button; otherwise, select
“Custom Install” from the pop-up menu for
more options or select another drive to install
the software. The installer will install the appro-
priate software into the System Folder of your
computer. If the installation was successful, a
dialog box will appear. Click Quit to leave the
installer and shut down your computer.
Shut Down and Open Computer
1. Shut down your Power Macintosh. If the com-
puter has been on for any length of time, wait a
few minutes for it to cool before beginning
the installation.
2. Disconnect the power and peripheral cables
from the back of the computer and move it to
an area where you can freely work.
En
2-4
PCI TriManual-Chapters 1-13 3/30/01 5:55 PM Page 25