Sonnet Technologies Crescendo_PCI Processor Upgrade Card - Manual (Page 33)

En
1-7
Install Crescendo/PCI Processor
Upgrade Card
1. Remove the Crescendo card from the anti-
static package, making sure to handle the card
by the edges (Figure 8). Your card may differ
from what is pictured below.
2. Align the Crescendo between the inner card
guides of the case and directly over the
Processor Card Slot (Figure 9). Gently press
down until the card is firmly seated in the
Processor Card Slot, taking care not to wiggle
the board as you install it into the slot.
3. Package the processor card you removed earlier
from the computer into the Crescendo’s anti-
static package and store it in a safe place.
Close Computer
1. Raise the support latch (Figure 10) and lock it
into place under the internal assembly.
2. Rotate the internal assembly into the
computer’s case (Figure 11).
Figure 9; Figura 9
Figure 10; Figura 10
Figure 8; Figura 8
Crescendo card
Crescendo card
anti-static
package
Processor Card Slot
support latch
Figure 11; Figura 11
internal
assembly
PCI TriManual-Chapters 1-13 3/30/01 5:55 PM Page 15