Maintenance – Alamo SR14 User Manual
Page 145
Advertising
MAINTENANCE
MAINTENANCE
SR20M/SR14M 06/98 Maintenance Section 5-15
© 2004 Alamo Group Inc.
DISASSEMBLY OF DIVIDER GEARBOX (Trained dealer personnel only)
STEP 1
Place the Divider Gearbox on a flat surface. Drive a sharp object through the Seal and force it out of the Hub Cap.
FIGURE 25.
STEP 2
Remove all eight of the M10 Bolts from both Cap Hubs, using a 14mm socket. FIGURE 26. Remove the Hub
Assemblies and gaskets from the Main Housing. FIGURE 27.
FIGURE 25
FIGURE 26
FIGURE 27
Advertising
This manual is related to the following products: