Alamo SR14 - Manual (Page 150)

MAINTENANCE
MAINTENANCE
SR20M/SR14M 04/94 Maintenance Section 5-20
© 2004 Alamo Group Inc.
STEP 4
Apply a small amount of Silicon sealer to the bore of the Hub Cap and to the outside diameter of the Seal .
FIGURE 42. Drive the Seal into the base of the Hub Cap. FIGURE 43-46. Care should be taken to keep the Seal
in line with the base when driving it into place.
FIGURE 42
FIGURE 46
FIGURE 43 FIGURE 44 FIGURE 45