Harrington Hoists and Cranes TCR Hoist - (1/4-6 Ton) - Manual (Page 47)

47
10.0 Parts List
When ordering Parts, please provide the Hoist code number located on the Hoist nameplate (see fig. below).
Reminder: Per Sections 3.12.6 and 1.1 to aid in ordering Parts and Product Support, record the Hoist code number and
serial number in the space provided on the cover of this manual.
TCR Nameplate
Parts lists for the TCR Air Hoists are presented in this section and are subdivided for reference in Figures 10-1 through
10-6 .
The letters C and P designate "Cord" and "Pendant" controlled hoists. Hoists with 2 parts or falls of load chain have a "-
2" designator following the model number.
Certain hoists parts in the following parts list are identified by hoist version 1, A, B or C. Use Table 10-1 to determine the
hoist version and select the correct hoist part(s).
Table 10-1 Hoist Version Identification Chart
Item Version 1 Version A Version B Version C
Last digit of the Serial Number:
Numerical digit
(ex. BL182)
"A"
(ex. MD165A)
"B"
(ex. DF124B)
"C"
(ex. KE189C)
Limit Shaft Attachment Method:
External
Retaining Ring
Hairpin Cotter
and Washer
Hairpin Cotter
and Washer
Hairpin Cotter
and Washer
Pendant Hose Connections:
Hose Barb
5mm thread
Hose Barb
5mm thread
90° Tube Fitting
1/8" pipe thread 90° Tube Fitting
1/8" pipe thread
Side Cover Thickness: 1/2" 1/2" 1/2" 7/8"
Chain Springs No No No Yes