IAI America RCP4-RA6R - Manual (Page 60)

5. Maintenance Inspection
54
5.6.3 Grease to be applied on the Rod (Sliding Surface)
The following grease is applied when the product is shipped out from IAI factory.
Rod (sliding surface) Kyodo Yushi Multitemp LRL 3
When supplying the grease, use the lithium㵨based all㵨around grease (consistency class: NLGI 2 to 0).
Caution: If the unit is equipped with the scraper (optional equipment), apply the grease on the rod sliding
surface inside the main unit.
Even if the grease is applied on the rod sliding surface outside the main unit, the scraper sweeps
out the grease, thus the grease would not be applied evenly throughout the whole area of the
shaft holder or the sliding surface.