IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 35)

Quick Start Guide
29
please refer to “Remote Data Access Setup” on page 23 . The Sync URL
setting is found in the Options form\System tab of the ISRP Batch Porta-
ble Utility. To reach the Sync URL setting, for viewing or editing, please
refer to the instructions that follow.
1. From the workstation application, select Portable > Synchronize CE
Device from the menu bar to open ISRP Batch Portable Utility. Log
into the utility.
2. Form the Main menu in the ISRP Batch Portable Utility, select Tools >
Options. The Options form appears. Click the System tab to bring this
portion of the form to the front.
The Sync URL setting is listed in the bottom half of the form. The Sync
URL setting is the network path to the remote server/IIS location. The
setting depends on your Remote Data Access configuration.
If you use the Create IIS Dependencies Utility to configure your IIS
settings, the default Sync URL setting should be correct. It should be
similar to the following example: http://{computer name}/
IntelliTrack/sqlcesa35.dll or http://{IIS com-
puter name}/IntelliTrack/sqlcesa35.dll.
If you manually configure your IIS settings, the default Sync URL set-
ting must be changed to represent the network path to the remote
server/IIS location. The setting should be similar to the following
example: http://{IIS computer name}/{virtual
directory name}/sqlcesa35.dll.
For more information about Remote Data Access configuration
options, please refer to
“Remote Data Access Setup” on page 23 .
For more information about manually configuring IIS, please refer to
“Manually Configuring Internet Information Services in Windows XP
Operating Systems” on page 27
or “Manually Configuring Internet
Information Services in Windows Vista Operating Systems” on
page 27
.
Setting Up IIS v6.0 to allow the ISRP Web Service Extension
If you are using IIS v6.0 and Windows Server 2003, you must enable the
web service extension to allow the ISRP Sync URL dll to run.